For details visit: https://watermanaustralia.com/slaughterhouses-rendering-facilities-and-abattoirs-effluents-parameters-to-be-treated/ Slaughterhouses, Rendering facilities, and Abattoirs Effluents parameters to be treated Effluent from slaughterhouses, rendering facilities, and abattoirs is highly polluted and requires rigorous treatment before discharge or reuse. The wastewater typically contains a mix of organic matter, fats, oils, grease, and nutrients. Here are the key parameters that need to be treated: 🔬 Typical Effluent Parameters in Slaughterhouse/Rendering/Abattoir Wastewater Parameter Typical Range (mg/L) Significance BOD₅ (Biochemical Oxygen Demand) 1,500 – 8,000 High organic load, indicates oxygen demand. COD (Chemical Oxygen Demand) 2,000 – 10,000 Total organic content, including non-biodegradables. TSS (Total Suspended Solids) 800 – 3,000 Includes blood, tissue, and hair residues. TDS (Total Dissolved Solids) 1,000 – 4,000 Includes salts, organics, and small particles....